Honda HR214 Bedienungsanleitung PDF herunterladen (Seite 30)

Air Cleaner Service

A dirty air cleaner will restrict air flow to the carbu-

retor. To prevent carburetor malfunction, service the

air cleaner frequently.

1. Remove the wing bolts and the air cleaner cover.

Remove the elements and separate them. Carefully

check both elements for holes or tears and replace

if damaged.

2. Foam element: Clean in warm soapy water, rinse

and allow to dry thoroughly. Or clean in high

flash-point solvent and allow to dry. Dip the

element in clean engine oil and squeeze out all the

excess. The engine will smoke during initial start-

up if too much oil is left in the foam.

3. Paper eleinent: Tap the element lightly several times on a hard surface to remove excess dirt, or blow com-

pressed air through the filter from the inside out. Never try to brush the dirt off; brushing will force dirt

into the fibers.

Fuel Strainer Service

1. Drain the fuel tank (see p. 23).

2. Remove the fuel line from the fuel tank.

3. Remove the fuel strainer from the fuel tank and

inspect the filter screen. Clean the screen with a

high flash-point solvent if it is dirty.

4. Reinstall the fuel strainer and the fuel line on

the fuel tank. Refill the tank with gasoline and

check for leaks.

FUEL LINE

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 47 48

Keine Kommentare

Honda HR214 Bedienungsanleitung Seite 30